|
|
This is the timber stand I made for dressing the twins. It's also where Yoshiko spends most of her time.934 viewsplatypus
|
|
It's pretty light, and I made it so that it'll fit through the doorways in the house. Mostly it stays in the bedroom.1258 viewsplatypus
|
|
Another perspective showing the bracing. And Yoshiko's magnificent bum.1718 viewsplatypus
|
|
When I'm carrying her face to face, I can just walk right into the stand and hang her up.1911 viewsplatypus
|
|
This arrangement allows me to adjust her height. High for dressing, low for hugging (the stand is not suitable for sex or photography, but is great for hugging her from in front or behind).818 viewsplatypus
|
|
Neckbolt with nut and washer1080 viewsplatypus
|
|
These are the components of the photo stand I use for the twins. There's a base, three legs, the boom, three holders for counterbalance weights, and a "stance modifier."756 viewsplatypus
|
|
It's huge. The boom has a reach of 1260mm (49") and stands 2130mm (7') high. The legs are 980mm (38.5") long. You can see I've added 40kg (90lb) of weights to one of the legs.727 viewsplatypus
|
|
It's made of 38.1mm (1.5") cold-drawn seamless steel tube with a wall thickness of 2.6mm, and it flexes. Look at the effect Kimiko's 43kg has on it. But the length of the boom gives me a lot of freedom with photos.1925 viewsplatypus
|
|
Notice how much straighter Kimiko is standing with the "stance modifier" fitted. But to accomodate its extra height, I have to raise the boom another 150mm (6"). This pic also shows off the Body 6/7's slender waist and great legs.2349 viewsplatypus
|
|
This is just a cheap winch from the hardware store, easily capable of lifting 43kg. It is firmly secured to the boom, and I replaced the cable with 4mm stainless steel wire rope.679 viewsplatypus
|
|
The components of the "stance modifier," which measures 410mm x 205mm (16" x 8"). I got the design from other Doll Forum members, for which, thanks.676 viewsplatypus
|
|
The top of the "stance modifier" and the end of the boom. When Kimiko is wearing her "stripper heels" it's maxed out. Note that the cable runs inside the steel tube.809 viewsplatypus
|
|
|
|
|
|
