| Random files - FlashGordoll's Gallery |
|
|
|
|
|
|
|
|
|
|
|
|
| Last additions - FlashGordoll's Gallery |
Gasket sealant for sticking the silicone tube to the rim of the chamber158 viewsFlashGordollSep 25, 2014
|
|
Under view of chamber gasket with Lexan lid106 viewsFlashGordollSep 25, 2014
|
|
8 mm copper tube silver soldered to vacuum chamber for mounting the vacuum plumbing132 viewsFlashGordollSep 12, 2014
|
|
Vacuum plumbing mounted onto chamber110 viewsFlashGordollSep 12, 2014
|
|
Under side of vacuum plumbing127 viewsFlashGordollSep 12, 2014
|
|
Mig welded sealing edge to thicken95 viewsFlashGordollSep 12, 2014
|
|
Thickened edge cleaned with angle grinder sanding disc, edge now measures between 5.5 and 6.5 mm109 viewsFlashGordollSep 12, 2014
|
|
MIG welded cylinder to 2 mm steel base86 viewsFlashGordollSep 12, 2014
|
|
Rear view of Vacuum pump/oil sight glass104 viewsFlashGordollSep 12, 2014
|
|
|
All these 5X parts will be attached to the vacuum chamber, still waiting for the tail end to fit the vacuum hose94 viewsFlashGordollSep 12, 2014
|
|
3 inlets are supplied with the pump, I ordered a 3/8 SAE 6mm bore hose fitting118 viewsFlashGordollSep 12, 2014
|
|
Copped propane tank, dimensions are 375mm diameter X 405mm height90 viewsFlashGordollSep 12, 2014
|
|
Chopped down the cylinder to 16 inches height, a 2mm mild steel plate with be welded to the bottom for the base86 viewsFlashGordollSep 12, 2014
|
|
Inside of chamber ground/cleaned with 36 grit angle grinder sanding discs96 viewsFlashGordollSep 12, 2014
|
|
| Last viewed - FlashGordoll's Gallery |
|
|
|
|
|
|
|
|
|
|
Victory! Flash fixed my arm and my wrist!891 viewsFlashGordollApr 13, 2024 at 07:37 AM
|
|
Let me down Flash!!497 viewsFlashGordollApr 11, 2024 at 02:39 PM
|
|
